ATEX industrial fan heater

ATEX Industrial fan heaters for space heating in explosive atmosphere gas (areas 1 or 2) or dust (areas 21 or 22).

Applications

  1.  Features
  • 1 Cable gland ATEX II 2GD (Power).
  • 1 Cable gland ATEX II 2GD (Safety Thermostat).
  • Motor fan series EVXP ATEX.
  • Voltage Three Phase 230/400V 50Hz.
  •  Safety thermostat with manual reset.
  • Galvanized screws.
  • Galvanized Steel Sheet Metal.
  • Battery electric heater ATEX certified by a notified body.
  1. Temperature of transported fluid
  • Temperature from -20°C up to +60°C.
  1. Ambient temperature
  • Temperature from -20°C up to +60°C.
  1. Options
  • Other power (up to 60 kW).
  • Other ATEX classification :
  1. Gas Versions : II 2G Ex d IIC T1 à T4 .
  2. Dust Versions : II 2D ExtD A21 IP6X T140°C, 210°C, 310°C or 460°C.
  • ATEX control panels pre-wired.
  • Construction with centrifugal fan.
  • Special Voltage and frequency.
  • Construction with stainless steel sheet metal, screws and stainless steel smooth or finned heater tubes.
  1. Remark
  • For heaters versions GD, the maximum surface temperatures for dust areas are downgraded 5°C for T4 and 10°C for T3.
  1. Standards
  • Each fan is tested in operation with vibration control in accordance with ISO 14964.
  • All fans are in accordance with the machine directive 2006/42/EC (as "partly completed machinery") and Directive 2009/125/EC Ecodesign “ERP” (Regulation n°327/2011).
  • Safety requirements for mechanical protections according to EN ISO 12499
  • The turbines are balanced according to ISO 1940 (standard class G6.3)

Contact o request a quote without commitment